|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() Hand Held Corner Rounder Punch $69.95 |
![]() 5/16 inch Wire Binding Combs $34.60 |
![]() RM-12/4 (12") Cutting Mat (4 Pack) $20.38 |
![]() VersaBind-E Electric Punch and $2,172.00 |
![]() Martin Yale W24 24" Paper Cutting $334.99 |
1 x Stepping Motor | $81.65 |
1 x 2 Year Worry Free Guarantee (a) | $29.99 |
1 x Utility Workstation | $0.00 |
1 x Plastic Luggage Strap | $19.95 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x 5" Easel Backs | $29.95 |
1 x SLOWDOWN UNIT COMPLETE | $17,160.45 |
1 x RACK PRESS.BAR | $60.41 |
1 x Pivano FG 118 Cutting Knife | $1,794.00 |
1 x FWD/REV SWITCH 14.95 | $529.15 |
1 x 60952 Evolution 2 Bench for the 104" Evolution E2 | $994.50 |
1 x BLANK 26" COMPONENT | $285.47 |
1 x ELEC MOTOR 115V 60HZ | $780.56 |
1 x 1" CORE BUSHING 19MM, E105 63340001 | $59.16 |
1 x Graphik D .017 Blades | $82.80 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x CONV BELT 14.95 DISCONTINUED | $927.98 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x Flat Belt | $107.73 |
1 x Entry/Valuelam Foot Pedal | $299.00 |
1 x Zippy Cutter | $9.95 |
1 x 36" Stand for the 120" 60612 Advanced Rotary Cutter (ARC) | $792.00 |
1 x Clamp Pads | $57.95 |
1 x Binding Workstation | $219.00 |