|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() LJ-6 Paper Jogger $1,265.00 |
![]() PBS Combo Spiral Plastic Coil $0.00 |
![]() Max 180" Utility Cutter $1,300.00 |
![]() AFT Multi Paper Folder $0.00 |
![]() Roll Film Supply Holder $0.00 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-DEFEATURED CHIP20201V70535 | $658.20 |
1 x 5" Easel Backs | $29.95 |
1 x DF 915 Paper Folder DISCONTINUED | $4,500.00 |
1 x 6600 series remote display DISCONTINUED | $24.95 |
1 x Cassida CleanPRO complete care kit for currency counters | $36.95 |
1 x STRIPPING DEVICE 02572720 | $23.17 |
1 x CLUTCH PULLEY FOR INTERFACE | $211.24 |
1 x Cassida CleanPro air duster | $49.95 |
1 x TBD - MICROPRCSSR Z-705 | $850.62 |
1 x Graphik D .017 Blades | $82.80 |
1 x Book Clamps | $39.95 |
1 x SPACER, BEARING | $22.10 |
1 x PL-1200HP 12 in. High Performance Laminator | $2,895.00 |
1 x Superior Quality 0.080 Utility Blades | $54.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x 4" x 12" Paper Cutter Jogging Block | $75.00 |
1 x 18" I Bar Shrink Wrap Sealer | $399.00 |
1 x RM-12/4 (12") Cutting Mat (4 Pack) | $20.38 |
2 x K-30 Replacement Scoring Blade | $13.20 |
1 x 1/4" SB-35 Bostitch type staples | $5.99 |
1 x Perfmaster Air V3 Perforating and Scoring Machine | $11,099.00 |
1 x Link | $11.21 |
1 x BASE LT BAR SPRT | $15.58 |
1 x SCREW (B-SEM M3X12) F/BC12 | $12.59 |
1 x 1/4X3/8X.17ID SPACER | $3.43 |
1 x TBD - INFRD SNSR WHT LBL NON ROHS | $364.82 |
1 x 5" x 16" Paper Cutter Jogging Block | $110.00 |
1 x Metal Loop Hangers | $59.50 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x Horizon PC64 Cutting Sticks | $81.00 |
1 x P/C CATCH TRAY-ON 1611 LINE DISCONTINUED D | $36.00 |
1 x Paper Receiving Tray DC-8 Micro | $64.64 |
1 x DC-210N Perf & Score Cutter | $179.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BLANK CHAD DIVERTER | $23.87 |
1 x Proteus Workbench For 124" Javelin Integra | $972.00 |
1 x Bind base | $53.38 |
1 x O-RING 4004583-00 | $27.81 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x Flat Belt | $53.87 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x PUNCH PIN 5/32 SQ. 3-1 | $89.84 |
1 x B/O FEED SHAFT | $62.28 |
1 x K-29 Replacement Perforation Blade | $13.20 |