|
The ONYX HD4170 "Rhin-O-Roll" Coil Inserter Module has 12-inch dual powered rollers with an adjustable lower roller for high performance and easier more accurate coil insertion. It has gauges to measure document thickness and coil sizing.
An essential piece of binder equipment, the HD4170 coil binding system can be used as a stand-alone production coil inserter or it can be attached to any vertical OD or HD Series binder equipment (optional mounting kit available).
Designed for fast coil insertion for all pitches and diameters. All HD4170 comb, wire and spiral coil binding systems come with crimper pliers and a built-in holder.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 12 inches |
Construction: | Metal |
Punch Type: | Electric |
Adjustable Hole Depth: | No |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Power: | 115 Volts, 3 Amps, 60Hz |
Size: | 5" x 17 1/2" x 10" |
Shipping Weight: | 38.5 lbs. Pounds |
![]() CoilPro 2000 ECP+ Coil Binding $1,481.00 |
![]() CoilPro 2000 ECP Coil Binding $1,055.00 |
![]() CoilPro 2000 EPI+ Coil Binding $1,799.00 |
![]() TW-3100 Manual Wire Punch and Bind $459.00 |
![]() Onyx HD6500 Comb, Wire, & Spiral $3,398.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |