|
The CoilPro 201i Junior is an affordable office coil binding machine. It punches up to 20 sheets of 20lb paper. You can make books from 3 sheets to 390 sheets thick with the right coil. This machine has an electric coil inserter on top and 46 Disengaging Punch Pins for creating different binding size books
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 13 inches |
Construction: | Metal |
Punch Type: | Manual |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | 1.75 inches |
Warranty: | 18 Months |
Power: | 110V, 60HZ |
Shipping Weight: | 25 Pounds |
![]() Onyx HD7000 Comb, Wire, & Spiral $3,604.00 |
![]() VersaBind-M Manual Punch and $1,169.00 |
![]() SteelTraK 65" Utility Cutter $5,060.00 |
![]() Excalibur 3S Utility Cutter $3,800.00 |
![]() Silicone Spray Lubrication $14.95 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x DISCONTINUED Evolution E2 84" Cutter | $1,674.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Versalam-2700 EP Roll Laminator | $3,699.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Photo Switch (LS1=LS3=LS4) | $40.26 |
1 x Textile Blade Holder | $85.50 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x Challenge 42TCM Cutting Knife | $480.00 |
1 x Stitch 'N Fold Face Trimmer | $17,299.00 |
1 x SP WLD FLD TBL | $118.76 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x SCREW 9001-490 | $22.10 |
1 x BLANK CHAD DIVERTER | $23.87 |
1 x ROUND MASTER SWITCH 9003390 | $356.80 |
2 x Binding Workstation | $438.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Count Stationary Roller Std | $35.95 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x Pull down rod 44013 | $245.28 |
1 x MOTOR PULLEY 260417 | $43.59 |
1 x RETARDER BUTTON | $14.25 |
1 x DIN7991 FILISTER HEA | $7.80 |
1 x Electronics Clutch/MS-4000 | $460.65 |
1 x LRG COOLING FAN PRF133 PRFSSR | $150.38 |
1 x FALCON THERMOSTATE BRACKE | $47.09 |
1 x THERMAL CUTOUT W/TERM (JD139) | $83.47 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |
1 x 1/4" SB-35 Bostitch type staples | $5.99 |
1 x HEAT SWITCH PRS311 PROFFESSOR | $40.17 |
1 x Clamp Pads | $57.95 |