|
The CoilPro 201i Junior is an affordable office coil binding machine. It punches up to 20 sheets of 20lb paper. You can make books from 3 sheets to 390 sheets thick with the right coil. This machine has an electric coil inserter on top and 46 Disengaging Punch Pins for creating different binding size books
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 13 inches |
Construction: | Metal |
Punch Type: | Manual |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | 1.75 inches |
Warranty: | 18 Months |
Power: | 110V, 60HZ |
Shipping Weight: | 25 Pounds |
![]() LJ-4 Paper Jogger $1,265.00 |
![]() Pouch Laminating Workstation $219.00 |
![]() PBPro 101 Plastic Comb Binding $99.00 |
![]() VersaBind-Ei Electric Punch and $2,399.00 |
![]() Textile Blade Holder $85.50 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x SWITCH ACTUATOR, IS127020 | $229.18 |
1 x O-RING DRIVE BELT-CC2700 | $43.98 |
1 x HR 3800 Take Up Roller | $299.00 |
1 x Ceiling Grid Squeeze Clips | $21.50 |
1 x THERMAL FUSE #K-356-236 | $182.62 |
1 x ROLL CUTTER BLADE 810500018 | $23.68 |
1 x Simplex 124" Cutter Bar (SIM310) | $898.20 |
1 x James Burns Lhermite EB3500 14" Electric Wire Closer | $6,209.00 |
1 x 5" Easel Backs | $29.95 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x Bolt - DISCONTINUED | $41.63 |
1 x PS-10 Rotary Crash Numbering Machine | $16,950.00 |
2 x VersaBind-Ei Electric Punch and Binding Machine | $4,798.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x Dura Wire 450 Manual Wire Closer | $349.00 |
1 x ONYX HD8370 Semi-Automatic Wire Closer | $1,729.00 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x MAGNA EDGE GUIDE KIT | $82.92 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Large Loop Head Adhesive Buttons | $99.00 |
1 x SHIM RING (PACMASTER | $79.58 |
1 x 755 RW BUMPERS | $3.68 |
1 x 57MM CORE- TITAN 810500081 | $23.68 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x 1/2" Aluminum Screw Posts | $17.02 |
1 x FUSE 1/2 AMP | $20.52 |
1 x 3/8" Type HO-3/8 staples | $6.05 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x WirePro Advantage Wire Binding Machine | $259.00 |
1 x DRIVEN NIP ROLER SHAFT DISCONTINUED | $236.75 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |