|
These hollow drill bits fit Nygren-Dahly and Baum ND standard paper drills. They will drill up to a 2-1/4" stack of paper.
Diameter: | 13/32" |
Shaft Length: | 2-1/4" |
Drill Bit Capacity: | 2-1/4" |
![]() 60954 Evolution 2 Bench for the $1,296.00 |
1" Lassco Wizer Large Corner $307.00 |
5/16" Lassco Wizer Special Corner $243.00 |
![]() 5" Colored Aluminum Screw Posts $162.02 |
1/8" Lassco Wizer Standard Corner $195.00 |
1 x Paper Sensor Unit/DF-755 | $49.48 |
1 x LATCH, SPRING | $68.08 |
1 x OBSOLETE SPROCKET, CUTTER | $68.47 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Gel Mounts | $119.00 |
1 x Simplex 44" Cutter Bar (SIM110) | $604.80 |
1 x VeloBind Debinder Tool for Hot Knife and Surebind | $24.95 |
1 x Pulley | $24.84 |
1 x Paper Detection Switch/DF-915, 920, DFC-12 DISCONTINUED | $58.77 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x Textile Blade Holder | $85.50 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x 24" I Bar Shrink Wrap Sealer | $409.00 |
1 x DIN7991 FILISTER HEA | $7.80 |
1 x 2 Year Worry Free Guarantee (b) | $59.99 |
1 x Adhesive for BQ-P60 and BQ-P6 | $169.00 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x P Roll Unit/DP-430/460 | $199.15 |
1 x Thermal Glue Pellets for Perfect Binders | $279.00 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x Simplex 124" Cutter Bar (SIM310) | $898.20 |
1 x Brush/DB-280 | $55.28 |
1 x 2.25 IDX.25D RNDBELT | $11.41 |
1 x RETARDER BUTTON | $14.25 |
1 x Letter 7 Mil Laminating Pouches | $35.58 |
1 x 1/2" Push-to-Lock Loop Screws | $19.98 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x TBD - WRIST PIN 111PM-3 | $66.27 |
1 x ROLLER 99S-43051 | $1,400.21 |
1 x Upper Blade Unit/DC-645 | $368.55 |
1 x Binding Workstation | $219.00 |
1 x Timing Belt | $36.05 |
1 x 25"x250' 3 mil Digikote Gloss Laminating Film | $89.21 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x STACK TRAY WIRE FORM | $36.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x Collar | $87.26 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x DIN9771 HEX SOCKET H | $7.80 |
1 x MBM BC12 12up Business Card Cutter | $5,399.00 |
1 x TENSIONER SHAFT, S01 | $86.48 |