|
This handy impulse sealer will seal and trim your bags in one operation. This produces a consistent seal without the need for a second operation to trim the excess plastic. Great for for use with continuous poly tube stock.
The maximum bag size is 12" wide by any length.
![]() 7/16" Baum/Nygreen Dahly Hollow $31.49 |
![]() Hoerauf 135A Top Right Cutting $354.00 |
![]() Hoerauf 135A Top Front Cutting $354.00 |
![]() Wohlenberg 137 F (Imperial) $750.00 |
![]() Wohlenberg A 86 Cutting Knife $584.00 |
1 x O-RING DRIVE BELT-CC2700 | $28.64 |
1 x GUIDE SIDE JTFY >USE 1771030 | $161.88 |
1 x BUFFER &CLUTCH GEAR 5200510 | $241.42 |
1 x WORM GEAR 2824110 | $65.87 |
1 x Pivano FG 118 Cutting Knife | $1,794.00 |
1 x BLOCK WEAR PAD | $9.77 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x ONYX HD8000 Manual Wire Closer | $609.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x 1/2" Solid Brass Screw Posts (10 Sets) | $28.01 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x TW-2100 Manual Wire Punch and Bind Machine | $459.00 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
2 x Yellow "T" Silicone Cords | $78.30 |
1 x iNumber Electric Hand Feed Numbering Machine | $3,950.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Ceiling Grid Twist Hanger with String | $40.95 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x 1/8" Solid Brass Screw Posts (10 Sets) | $27.16 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x PUNCHING PLATE | $165.12 |
1 x 7" Easel Backs | $31.95 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |
1 x 1/2" Type HO-1/2 staples | $8.33 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x Simplex 84" Cutter Bar (SIM210) | $726.30 |
1 x 2.25 IDX.25D RNDBELT | $11.41 |