|
Our 3/16 Aluminum screw posts are designed for binding a small number of sheets of paper together. They are perfect for menus and wine lists as well as other documents. They can be opened to insert or replace pages, and you dont even need to use any tools. Finger pressure is enough to unscrew them, but if the screw is extra tight a screwdriver or a small coin in the slot will nudge them loose.
Of course there are also many arts and crafts uses of these handy binding posts. You can use them to connect just about anything that you can punch or drill a 1/4" hole through. Just push the post through the hole, thread the screw into the post and finger tighten. Your materials are now securely fastened!
These short posts are threaded all the way through for extra strength. Screws and posts are sold together to assure that you have the proper length screws to fit your posts.
If you would like to have a different appearance, you might want to look at our plastic screw posts. If you need greater strength to hold large or heavy materials, please consider our steel screw posts.
9/32" Lawson / Miller HFD / Baum $32.95 |
2" Aluminum Screw Posts $11.09 |
1/8" Challenge Lassco Drill Bit $39.95 |
Multicut 10/550 Cutting Knife $374.00 |
Onyx OD4012 Heavy Duty Electric $2,574.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Pilot Light | $17.96 |
1 x Foldup 4" Wall Mount Literature Holder | $84.00 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,496.14 |
1 x Clutch Unit | $92.91 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x Badge Reels | $2.95 |
1 x Passport Die Cutter | $105.00 |
1 x Coil Crimper Pliers | $29.99 |
1 x Zippy Cutter | $9.95 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
2 x Pressure Sensitive Clip | $39.90 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x 62359 Stand, Waste Catcher & Roll Feeder Package for 120” Sabre Series 2 | $1,698.00 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x ML-9 9" Pouch Laminator | $299.00 |
1 x Business Card Pockets | $4.49 |
1 x HOUSING, SIPLICITY BEARING #PB | $275.31 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x NONSTK-INDICATOR LIGHT,RED,24V | $48.74 |
1 x PAPER SEPRTR >USE T12H26070 | $56.17 |
1 x CAP BEARING MOLDED | $35.22 |
1 x Photo Microsensor (KI1234-AALF)/DC615 | $51.22 |
1 x #214 SILICONE O-RING | $8.16 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Plastic Luggage Strap | $19.95 |
1 x 62351 Stand, Waste Catcher & Roll Feeder Package for 40” Sabre Series 2 | $1,125.00 |
1 x Take One Coupon Clip | $376.00 |
1 x CRADLE BUSHING | $283.70 |
1 x CAPSTAN ROLLER GRIND | $120.22 |
1 x 62361 36" Stand for 40” Sabre Series 2 | $553.50 |
1 x MBM BC12 12up Business Card Cutter | $5,399.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x 7" Easel Backs | $31.95 |
1 x 5" x 12" Paper Cutter Jogging Block | $84.00 |
1 x Pulley Unit | $25.95 |
1 x Binding Workstation | $219.00 |
1 x CR818 Manual Creaser | $620.00 |
1 x MENU SIZE (3 MIL) RF | $197.23 |
1 x Refill No.500 Staples (DC-S4, DFC-S, DBM-80H, AR-F15) | $129.60 |
1 x Finned Price Rail Flag Holder | $85.95 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x Nylon Secure Tack | $13.50 |
1 x C900 ultra heavy duty coin counter and sorter | $1,389.95 |
1 x ECP13 Electric Perforator & Creaser | $1,799.00 |
1 x O RING G70 | $23.17 |