|
Turn your Precision Cutting Bar into a Cutting System. The Keencut Proteus Workbench, combined with the 124" Javelin Integra or the original Evolution cutter, creates the ultimate precision cutting table.
The modular design of the Proteus enables growing businesses to reconfigure and expand their bench as needed – quickly and economically – to work in concert with new demands. No extra tools are necessary, assembly is ultra-simple, and the applications are endless.
Any Proteus Workbench can be fitted with a customer-supplied top of choice – glass, MDF or plywood.*
*Worktop and Javelin Integra cutter are not included. Glass top installation requires optional white silicone cord and four extra end caps.
![]() 6" Double Wing Easel Backs $5.95 |
![]() 1/4" Baum/Nygreen Dahly Hollow $30.79 |
![]() Triumph 4850 Cutting Knife $251.00 |
![]() 18" x 500' 1.7 Mil Low Melt $96.72 |
![]() Graphik D .017 Blades $82.80 |
1 x O-RING DRIVE BELT-CC2700 | $28.64 |
1 x GUIDE SIDE JTFY >USE 1771030 | $161.88 |
1 x BUFFER &CLUTCH GEAR 5200510 | $241.42 |
1 x WORM GEAR 2824110 | $65.87 |
1 x Pivano FG 118 Cutting Knife | $1,794.00 |
1 x BLOCK WEAR PAD | $9.77 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x ONYX HD8000 Manual Wire Closer | $609.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x 1/2" Solid Brass Screw Posts (10 Sets) | $28.01 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x TW-2100 Manual Wire Punch and Bind Machine | $459.00 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
2 x Yellow "T" Silicone Cords | $78.30 |
1 x iNumber Electric Hand Feed Numbering Machine | $3,950.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Ceiling Grid Twist Hanger with String | $40.95 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x 1/8" Solid Brass Screw Posts (10 Sets) | $27.16 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x PUNCHING PLATE | $165.12 |
1 x 7" Easel Backs | $31.95 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |